
绿标
 
- 注册时间
- 2007-5-7
- 最后登录
- 2013-11-17
- 生日
- 1979 年 1 月 1 日
|
发表于 2009-10-24 21:14:15
|
显示全部楼层
原帖由 換條龍 于 2009-10-24 15:53 发表
m.c兄,你還是沒弄清楚,會全部上漆大都是用於噴砂斗或是雕刻斗,因為噴砂斗或雕刻斗要上棕櫚臘很因難
光面和毛面的烟斗都可以用水漆的,毛面的同样可以用棕榈蜡,只是需要工具和技术。
下面是Todd Johnson的一段话:
I don't know of any artisan makers who shellaq pipes as the finish. Shellaq is best used as somewhat of a sealer, ensuring that you don't buff off stain or ruin the smooth-as-glass finish you've worked so hard to achieve. The way most makers do it is to mix up a very thin spit coat (I doubt anybody mixes it to precise measurements, but it should be about the consistency of 1% milk maybe). With a pipecleaner, apply the shellaq to the entire pipe and immediattely wipe it all off. You've got about 5 seconds working time so don't dally. What you're left with is essentially a film that allows you to polish and shine the pipe instead of actually continuing to remove material (be it ever so slight)...
[译]我不知道有哪个制斗师是把水漆当作表面上光来用的。水漆的最佳用途可以说是作为一个封闭层,以确保你的抛光轮不会把染料磨掉或是磨坏了你好不容易弄好的光亮如镜的表面。大多数制斗师的做法是调配点很稀的溶液(我想不会有人去准确计量比例,但是大概可能是1%乳剂的浓度)。用通条把水漆涂在整个烟斗上,然后立即擦掉。这其间你只有5秒钟的时间,所以不要磨蹭。你留下的基本上就是一层薄膜,它让你能够继续抛光和上光烟斗同时又不会磨掉更多的材料(尽管只是轻微的一点)……
另一处有人想做个石楠的斗嘴,问用什么材料能把石楠木的表面“封”住,他的回答是:
You don't really need to "seal" them, but they do tend to get a bit slimy over time. I've always just finished them with a spit-coat of shellac and carnauba.
你并不需要真正去“封住”它,但是它(石楠)时间长了确实容易污脏,我向来都是只上一层很薄的水漆和棕榈蜡。
PS:上边的水漆译成虫漆更妥当些。
[ 本帖最后由 m.c. 于 2009-10-24 21:19 编辑 ] |
|