海泡石接榫松动，请大家给点建议吧。谢谢
原来连接在烟斗那一段的接榫是螺旋形并且用胶粘住的，我老觉得那个啥啥啥，就调皮捣蛋的想办法给弄下来了。一开始旋上还是很紧的，可是越来越松动越来越松动了，现在更好，稍微一拉就能出来，麻烦来啦，这该肿馍办呢？我有一只笔，金属笔杆，正好能塞进去，是不是锯一截下来装进去，然后做一个直插式的烟嘴呢？可是有两个疑惑，1金属管子装进去是有点松动的，用什么办法可以固定住？比如糯米浆蛋清大蒜汁？还是其他什么好办法？2金属管子遇热会膨胀吧，会不会涨坏烟斗呢？
或者还是用原来的接榫用胶水给沾上不要再拆下来了？可是接榫和烟斗之间的结合有一部分是成阶梯状，那里是个卫生死角，似乎不好清理啊，当时拆下来就是为的这个原因，难道还要这样装上去吗？
肿馍办这该肿馍办啊，这事情让我万般纠结纠结万般，各路大侠帮我想想办法出出主意吧，别让我抽烟的时候一只手拿着烟斗一只手扶着烟嘴，那感觉可真是不太那个啥啥啥的啊 try the old method ... 缝纫线 :victory: 原帖由 jt 于 2012-2-12 12:39 发表 http://bbs.pipevillage.org/images/common/back.gif
try the old method ... 缝纫线 :victory:
您的意思是不是用线缠着旋进去？ 试验了一下缠线，还是不行，空隙太大了 这个现象是因为斗榫内的螺纹磨损滑丝了。
海泡石斗斗榫内的螺纹并不耐磨，一般不建议多次拆卸。
你可以仔看下榫头内部，若螺纹已磨平的话，设法寻斗师再修复。
若螺纹还算清晰，建议直接黏上，注意斗嘴不要经常拆卸了。 楼主一定没有听说过有种东西叫“百得胶”，德国货，一般麦德龙、沃尔玛有货。涂在接口内，等半干的时候慢慢旋入烟嘴，等待片刻再慢慢旋转出来。全干后即可恢复初始的状态。 I have few vintage meerschaum pipes that came with the similar problem.
A particular one, came with three types of sewing thread, two whiteand one blue, the blue thread measures about 8 inches in length.All heavy coated with beeswax ,tar and who knows what …
AfterI cleaned the pipes, I found the tenon was in good condition but the mortise had enlarge over the years (this particular pipe was about 120 years}.
Finally, I found a plastic tube that can fit the mortise and take the tenon.I sanded the tenon smooth.
I used two parts epoxy to glue the tube to the shank,hopefully that will permanently fix the problem.So far so good.
But be warned!The pipe resell value will be affected as it is no longer original.The other less invasive method using a sewing thread will be recommend if resale value is the consideration.
I have an old Paul Fisher, I just use new thread with beeswax and it seems to work fine too.Other materials I have tried and find okay is the white plumber's teflon tape.
[ 本帖最后由 jt 于 2012-2-13 20:32 编辑 ] I have few vintage meerschaum pipes that came with the similar problem.
我的几个海泡石烟斗也有类似问题。
A particular one, came with three types of sewing thread, two whiteand one blue, the blue thread measures about 8 inches in length.All heavy coated with beeswax ,tar and who knows what …
比较特别的问题是三个类型的缝线，两条白色，一条蓝色。蓝线长8英寸。三条都包着厚厚的沥青、蜂蜡，还有些不知道的东西。
AfterI cleaned the pipes, I found the tenon was in good condition but the shank had enlarge over the years (this particular pipe was about 120 years}.
我清洗了烟斗，发现凸榫还是好的，但因时间长了，杆膨胀起来了。
Finally, I found a plastic tube that can fit the shank and take the tenon.I sanded the tenon smooth.
最后，我发现可以用塑料管套在杆上，再接上凸榫。我用砂纸把凸榫磨光。
I used two parts epoxy to glue the tube to the shank,hopefully that will permanently fix the problem.
我把环氧树脂涂到套子和杆上，粘合起来，希望这样能接的牢固。
So far so good.
到现在是好好的。
But be warned!
但要注意
The pipe resell value will be affected as it is no longer original.
在重新出售烟斗时，因为它不再是原来的样子了，会影响价格。
The other less invasive method using a sewing thread will be recommend if resale value is the consideration.
如果考虑售价不受影响，破坏性小的方法是用缝线。
I have an old Paul Fisher, I just use new thread with beeswax and it seems to work fine too.
我有一个旧的Paul Fisher， 就是用包腊的新线，似乎也能搞定。
Other materials I have tried and find okay is the white plumber's teflon tape.
我还试过其他材料，水管工用的白色特氟龙生料带也不错。
非常感谢JT大侠的热心解答，通过我朋友的翻译我终于看明白了大侠给我这么多的良好建议，对我的帮助很大，再次感谢 Thank you for you translation and kind words.
I am not a pipe maker nor pipe seller,this is what I have learned from friends andmy own limited experience.
I am sure there may be something better or an alternative that can be done.
These are just my suggestions .Good luck with your repair. 又有一个问题，最近发现很多老海泡石的接榫坏了或者有些其他问题需要更换，可是不知道这东西的具体学名怎么说，特别是想知道这个零件的英文名字该怎么说，我想，如果有了这个零件的英文名字就会容易找到吧，我想买一大把来备用，免得需要的时候手头没有只能翻白眼干着急。
页:
[1]
2