蓝标
- 注册时间
- 2011-1-17
- 最后登录
- 2024-11-19
|
发表于 2012-2-15 04:38:22
|
显示全部楼层
几乎没有品牌可以象dunhill那样确切断代的(即便dunhill的斗也不是都可以准确的判别),Stanwell有一些线索可以试试,但是也没有一个完全被认可的标准,以下一篇英文的短文可以有所帮助:
) Regd. No. stamping discontinued in late 1960s to very early 1970s. This is the Stanwell trade mark registration. The “48” indicates that the registration was made in 1948. (info rec’d from Jorgen Grundtvig, Managing Director, Stanwell A/S)
2) Block letter stamp “Silver S” used until late 1960s and then changed to script.
3) Up until the early 1960s only the top pipes, e.g. “Hand Cut” had the stem/mouthpieces stamped with the Stanwell logo of a crown over “S”. The “Hand Cut” is stamped on the shank of the pipe. The “Standard Models” may or may not be stamped with the “S” logo without the crown.
4) “Stanwell” stamp in script dates to the 1950s.
5) Progression of the Stanwell logo is: “S” in white paint; crown “S” in white paint; brass crown “S” and finally a silver crown “S”.
6) “Handcut” stamped on black vulcanite stems have not been done since at least the 1970s and possibly earlier. (info from J.G.).
7) Currently, the only mouthpieces that have “Handcut” stamped on them are made of Cumberland rod and are used exclusively on the “Unique” line of pipes. (info from J.G.)
Early Stanwell/Winslow pipes were stamped with a “W”. In later years this has been changed to a “Winslow” stamp.
9) Stanwell started using acrylic for their mouthpieces in 1995 and identified the acrylic stem with a “dot” following the Stanwell crown “S” logo. This practice has been discontinued.
10) Benni Jorgensen, father of Lasse Skovgaard, has been doing the Stanwell repairs since1995. Prior to this, they were done by Tom Eltang.
另外有些斗型只在一定时期内生产,也可以作为参考
烟斗抽起来烫恐怕是特例,我手里的几把斗抽起来温度和其它烟斗差不多 |
|