烟斗村※论坛—全球华人烟斗社区  The Chinese Pipe Smoking Community - Forum

 找回密码
 注册
查看: 6306|回复: 5

关于STANWELL的断代问题

[复制链接]

22

主题

220

帖子

280 小时

在线时间

绿标

Rank: 2Rank: 2

注册时间
2011-12-23
最后登录
2024-10-2
发表于 2012-2-12 20:58:20 | 显示全部楼层 |阅读模式
带注册号的STANWELL的断代问题,村子里已经有很多帖子讲得很详细了。但是不带注册号的STANWELL该如何断代呢?
又及:最近入了2把STANWELL二手斗,一把是60年代的,一把是80年以后的,两把抽吸都干燥顺畅,但是斗钵很烫(和我其它的斗相比烫很多),不知道这是不是STANWELL的特点?

27

主题

746

帖子

111 小时

在线时间

绿标

Rank: 2Rank: 2

注册时间
2011-10-8
最后登录
2013-2-4
发表于 2012-2-14 13:53:32 | 显示全部楼层
你是不是抽得太急了?或烟草填得太密?

22

主题

220

帖子

280 小时

在线时间

绿标

Rank: 2Rank: 2

注册时间
2011-12-23
最后登录
2024-10-2
 楼主| 发表于 2012-2-14 23:32:34 | 显示全部楼层

回复 2# kendall441 的帖子

准确的说在同等填草和抽吸速度下,比其它石楠斗要烫,和海泡斗差不多。

33

主题

666

帖子

1289 小时

在线时间

蓝标

Rank: 3Rank: 3Rank: 3

注册时间
2011-1-17
最后登录
2024-11-19
发表于 2012-2-15 04:38:22 | 显示全部楼层
几乎没有品牌可以象dunhill那样确切断代的(即便dunhill的斗也不是都可以准确的判别),Stanwell有一些线索可以试试,但是也没有一个完全被认可的标准,以下一篇英文的短文可以有所帮助:
) Regd. No. stamping discontinued in late 1960s to very early 1970s. This is the Stanwell trade mark registration. The “48” indicates that the registration was made in 1948. (info rec’d from Jorgen Grundtvig, Managing Director, Stanwell A/S)
2) Block letter stamp “Silver S” used until late 1960s and then changed to script.
3) Up until the early 1960s only the top pipes, e.g. “Hand Cut” had the stem/mouthpieces stamped with the Stanwell logo of a crown over “S”. The “Hand Cut” is stamped on the shank of the pipe. The “Standard Models” may or may not be stamped with the “S” logo without the crown.
4) “Stanwell” stamp in script dates to the 1950s.
5) Progression of the Stanwell logo is: “S” in white paint; crown “S” in white paint; brass crown “S” and finally a silver crown “S”.
6) “Handcut” stamped on black vulcanite stems have not been done since at least the 1970s and possibly earlier. (info from J.G.).
7) Currently, the only mouthpieces that have “Handcut” stamped on them are made of Cumberland rod and are used exclusively on the “Unique” line of pipes. (info from J.G.)
Early Stanwell/Winslow pipes were stamped with a “W”. In later years this has been changed to a “Winslow” stamp.
9) Stanwell started using acrylic for their mouthpieces in 1995 and identified the acrylic stem with a “dot” following the Stanwell crown “S” logo. This practice has been discontinued.
10) Benni Jorgensen, father of Lasse Skovgaard, has been doing the Stanwell repairs since1995. Prior to this, they were done by Tom Eltang.
另外有些斗型只在一定时期内生产,也可以作为参考
烟斗抽起来烫恐怕是特例,我手里的几把斗抽起来温度和其它烟斗差不多

0

主题

2

帖子

1 小时

在线时间

灰标

Rank: 1

注册时间
2012-2-15
最后登录
2012-2-15
发表于 2012-2-15 08:27:37 | 显示全部楼层
可能有两个原因。1,年代久远了,烟斗壁本身就薄了。2,速度太快,厚壁不明显。。。。(纯属臆断)

22

主题

220

帖子

280 小时

在线时间

绿标

Rank: 2Rank: 2

注册时间
2011-12-23
最后登录
2024-10-2
 楼主| 发表于 2012-2-15 12:42:51 | 显示全部楼层

回复 4# 蓝刃 的帖子

貌似1980年至今的STANWELL无法断代,除了那个加点的皇冠S标能确定是在1995年-?。
根据特定斗型断代的难度和工作量太大了。
此外空心和实心的皇冠能够作为断代的依据吗?(现在的新货好像都是实心的,其中也有个HAND MADE系列)
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|Archiver|联系本站|〖 烟斗村 〗

GMT+8, 2024-11-23 10:56

Powered by Discuz! X3.4

Copyright © 2001-2022, pipevillage

快速回复 返回顶部 返回列表